The gaming chair is an essential thing for every gamer, especially if they are professionals. It provides gamers with comfort while they play for hours. Gaming chairs are also expensive, and after buying a good gaming chair, you wouldn’t want to change it again and again.
Usually, the inexpensive gaming chairs aren’t good enough and so when you get an expensive one, make sure you take perfect care of it. Gaming chairs come with manual instructions on how to take care of them. It would be best if you stuck to the guide.
However, in case you have lost the guide, here is our guide in keeping your chair intact for years.
Vacuum the upholstery of the chair regularly
First, take a look at what upholstery your chair has, such as mesh, leather, PU, PVC, or fabric.
After this, you can vacuum or dust the dirt from your upholstery. Clean off the dirt and debris. If your chair’s upholstery is mesh or fabric, then you should use your vacuum cleaner. For the fabric upholstery, brush attachment will work great on it.
If the chair is made up of PVC, PU, or leather upholstery, then vacuuming is not essential, you can use a microfiber cloth for regular cleaning and dusting.
Cleaning and dusting should be done regularly, every once or twice a week.
Use Water or Solvent Solution
It would be best if you didn’t drink or eat near the chair, but it’s hard not to do that. So the chances are high that you may get a stain on your chair due to a spill or something.
To clean that, you can use water or solvent solution. On your chair, there is a label that either says S or W or S/W. S means you can use a solvent solution, and W means only water can be used. SW means you can use water and solvent solution both.
Where W is written, you can use a little dishwashing soap with it. On the mesh, you may also want to bloat it properly. Leather chairs are usually cleaned using only water. Make sure you are nicely rubbing the spill or stain area.
No matter how clean you try to keep your chair, some stains remain even after cleaning them with water or solvent solution.
For these stains and spills, you should try spot cleaning methods using the rubbing alcohol. Before you apply the rubbing alcohol directly to the spot, do a test. Apply a little rubbing alcohol under the chair and check after a while if there is any damage.
If you see no damage, then apply it directly to the affected areas.
Don’t Forget the Base, Frame, and Armrest
This bit of cleaning is easier than the rest. The base, frame, and armrest can be cleaned by using soap or dishwashing detergent. Make a bowl with water and detergent in it than gently clean these areas with a cloth or sponge.
Check for the Caster Wheels and any Loose Screws
Caster wheels are a tight spot to clean as you have to go in every nook and cranny. First of all, you have to turn your chair and then take out all the hair and dirt trapped inside it.
After getting out the hair and the dirt, clean it using the crevices attachment of your vacuum. Clean all the crevices and for the caster wheels use alcohol swabs
After you are done cleaning each and everything, make sure you are tightening all the screws of your chair.
How to Maintain your Chair?
While cleaning, vacuuming, and dusting the chair is essential, there are some other things you can do to maintain your gaming chair.
Don’t Eat Near your Chair
Eating near your chair is not a great practice, and to maintain your chair, you should avoid eating near it. The chances of spills and stains are higher when food or drinks are around. Leave your chair for gaming, watching movies, and reading only.
If you can’t eat anywhere else than your chair, you must use a napkin or cloth for your chair’s safety.
Use Lubrication for the Caster Wheels
Your wheels may start squeaking after a while, and it may affect your chair’s gliding ability. So after you are done with cleaning your chair and its caster wheels, use something to lubricate them.
Also, keep your floor nice and tidy.
Use a Covering for your Chair
The upholstery of the gaming chair, either made of fabric, mesh, or leather, can tend to wear out and damage the chair. Use a chair covering if you want to give your chair some extra protection.
Use a good quality covering if you are doing so. It will ensure to prevent any wear and tear.
Chairs that have leather upholstery especially cannot maintain their A-one status for long if it frequently comes in contact with sweating.
Even when your leather chair says that it is water-resistant, you can’t be entirely sure about it because leather and other synthetic materials cannot be entirely water-resistant. If you are continuously sweating on these chairs, it will damage the balance of the pH. It would result in wearing off or peeling off the upholstery.
And so it is vital to use these chairs in a cool environment. This is for leather chairs only.
In terms of sweating on fabric and mesh chair, you may experience the smell of some sort, but otherwise, it will not be destroyed.
Keeping a gaming chair like new for a long time is not hard, and with little effort, you can maintain them well. After buying an expensive chair, you might as well want to secure it.
Keeping them clean is not even expensive, and just by following a few cleaning rules and avoiding some stuff, you will be able to enjoy the comfort of your gaming chair for a long time.
Before you follow our guide, make sure to read the manufacturer’s manual as well.
Now that you know about the proper way on how to ensure that your chair lasts you for years, why don’t you have a look at our reviews for the five best gaming chairs for under $200? We all know how gaming chairs are not just exclusively for gamers so we created a buyer guide + the product reviews for you to take a look at!